Battle Bunker
Battle Straps Weightlifting Straps | Premium Padded Lifting Straps
Battle Straps: Padded Weightlifting Straps Built For Heavy Pulls
Your grip should never be the reason a set ends. Battle Straps are padded lifting straps that lock your hands to the bar so your back, traps, and hamstrings get the work instead of your forearms. Deadlifts, rows, shrugs, rack pulls, pull-ups. If you pull it, these hold it.
18 inches of heavy cotton webbing with 3mm neoprene padding, reinforced stitching, and a carrying bag. Two colorways, Black and OD Green. $15.49 a pair, free US shipping over $99.
Specs
- Length: 18 inches, enough for three full wraps on a standard barbell
- Material: Heavy-duty cotton webbing, reinforced box stitching at the loop
- Padding: 3mm neoprene wrist pad, sewn in, not glued
- Style: Lasso strap, the most forgiving style for mixed training
- Colors: Black, OD Green
- Includes: One pair plus a carry bag
- Best for: Deadlifts, barbell rows, dumbbell rows, shrugs, rack pulls, lat pulldowns, weighted pull-ups, farmer carries
What Lifting Straps Actually Do
On any heavy pull, grip fails before the target muscle does. That is not a strength problem, it is a leverage problem. Your fingers are working against a bar that your posterior chain could move for several more reps.
Weightlifting straps transfer the load from your fingers to your wrists. You keep pulling until the muscle you are actually training gives out. More quality reps under load is the entire point, and it is why you see straps in every serious gym on every heavy pull day.
The padding matters more than people expect. Unpadded gym straps dig a line into your wrist on anything above 315. Neoprene spreads that pressure so you can hold a heavy set without counting down the seconds until you can let go.
When To Use Them, And When Not To
Use straps for: your top sets, anything above roughly 80 percent, high-rep back work where grip quits early, and any day your hands are already beat up from rucking, carries, or pull-ups.
Skip the straps for: warm-ups, lighter volume work, and anything where grip is the point. Farmer carries for time, dead hangs, and grip-specific training should stay raw. Straps are a tool for moving load, not a replacement for building hands.
Train both. Straps on your heavy work, raw on everything else, and your grip keeps getting stronger while your pulls keep getting heavier.
How To Use Lifting Straps
- Feed the tail through the loop to form a collar and slide your hand in, seam facing up.
- Tighten the collar at the base of your palm, not up on the forearm.
- Lay the tail across your palm and wrap it under and around the bar, toward you, two or three times.
- Roll the bar back toward you to cinch the wrap tight, then grip down hard over the strap.
- Pull. If the strap slips, you need one more wrap or a tighter cinch, not a tighter grip.
Full walkthrough with photos: how to choose and use lifting straps.
Straps Or Wrist Wraps?
They solve opposite problems and people mix them up constantly.
Lifting straps are for pulling. They hold the bar so your grip does not quit. Wrist wraps are for pressing. They brace the wrist joint so it does not fold back under a heavy bench or overhead press.
If you train both push and pull, which is most people, get the Push Pull Bundle and cover both days for less than buying them separately. Pressing only? Go straight to Battle Wraps.
Why These And Not The $6 Pair
Cheap workout straps fail in two predictable ways. The stitching at the loop lets go, usually mid-set, or the padding compresses into a useless flat strip inside a month. Both are the same root cause, which is the manufacturer saving forty cents.
Battle Straps use box-stitched reinforcement at the loop, the highest stress point on any lift strap, and neoprene padding that is sewn in rather than glued on. Built by a veteran-owned brand that sells to people who train hard enough to break gear.
Frequently Asked Questions
Do lifting straps weaken your grip?
Not if you use them correctly. Straps used only on top sets while you train lighter work raw will not cost you grip strength. Straps used on every single set from warm-up to finish will, because your hands stop getting stimulus. Use them for load, not for convenience.
What length should lifting straps be?
18 inches is the standard and it is what these are. Shorter straps do not give you enough wraps on a thick bar. Longer straps leave excess tail flopping around, which is annoying at best and a snag hazard at worst.
Lasso straps or figure 8 straps?
Lasso straps, like these, release fast and work across every pulling movement, which is why they are the default. Figure 8 straps hold more but lock your hand to the bar, so they are strictly for max deadlifts and a bad idea for rows or anything you might need to drop quickly.
Are lifting straps allowed in competition?
Depends on the federation and the lift. Most powerlifting meets ban straps on the competition deadlift. Strongman events often allow them. Check your specific rulebook, and train with and without so a no-strap meet day is not a surprise.
Can I use these for pull-ups?
Yes, and they are excellent for weighted pull-ups and lat pulldowns where grip gives out before your back does. Wrap the bar the same way you would a barbell.
How do I wash them?
Cold water by hand, mild soap, hang dry. Do not put them in the dryer. Heat is what kills the neoprene padding.
Stop Losing Reps To Your Hands
Grip failure is the most fixable limit in the gym and it costs $15.49 to fix. Pick your color, add to cart, and pull what you are actually capable of.
Training for a PT test or a ruck? Pair these with Battle Wraps and Battle Bands, or browse all Battle Bunker training gear.
